I am trying to build a Win7PE_SE bootdisk. I downloaded Win7PE_SE_2013-05-24.zip and the building process succeeded without errors.
But when i boot the system i am unable to map a drive to a natwork share (net use m: \\10.1.1.3\vol2).
The error is:
System error 53 occurred
The network path was not found
I suspected a bugging script or module so i started from scratch with the lite version Win7PE_SE_Small_2013-05-24.zip
Out of the box the network drive mapping works. So i began adding modules en scripts but afther adding some drive mapping start to fail again.
So i started adding modules one by one in different combinations. But there is not a specific module responsible for the network drive failing problem.
I can have a working problem with two working modules. But when a add the same two modules to another configuration the drive mapping start to fail.
The conclusion now is it depends on the number of modules. But i have memory enough (the virtual machine has 2GB of memory and a do not use many scripts\modules).
The ISO size of the working system is 291mb afther adding two modules the size of the resulting iso is 292mb.
I found out the difference between a working and a not working system is the 'TCP/IP NetBios Helper' service.
This service is started in a working build and not started in a not working version. Also I am unable to start it.
My problem is about the same as:
But i do not use a lot of modules and do not use the cleanup image script.
Hours and hours i spended building different systems without result ! Please help !
An example of a working an a not working buildlog you can download here http://tinyurl.com/p8hcurh
